How is the toy controlled?

1. To switch on the vibrator, keep the power button pressed for 2-3 seconds.
2. With short clicks on the power button you can click your way through the different vibration modes.
3. To switch it off, you have to hold down the power button for 2-3 seconds.

Attention, the toy must be dry before charging.

If you still need a USB charger, we have one here for you.

The rabbit vibrator «Mily» is battery operated and can be recharged using the included USB cable. All you have to do is connect the supplied USB cable to a USB port and plug the other end into the charging socket provided on the toy. The small socket is on the underside of the vibrator. Don't worry, the silicone covers the socket somewhat, which makes the toy waterproof. Simply prick the plug carefully and plug it in.

The LED flashes until the toy is fully charged and goes out when fully charged. The charging time is approx. 60-120 minutes. When fully charged and depending on the mode, the rabbit vibrator can be used for approx. 60 minutes.

Carefully clean the water-splash-proof toy with a little water and mild soap before and after use.

We recommend using a toy cleaner for disinfection.
You can find our toy cleaners here.

Rabbit vibrator «Mily» should only be used with water-based lubricants, as silicone-based lubricants could damage the material.

The sextoy is waterproof IPX6. An IPX6 waterproof toy is protected against dripping, splashing and splashing water, but must not be used under water, e.g. in the bathtub.

The toy must not be used while it is charging.

You can find our lubricants here.

TYPE: Rabbit Vibrator
MOTOR: Operated with rechargeable batteries (USB)
VIBRATION: 12 Vibrationss-Modi
GRÖSSE: Length 19.8 cm / Ø 3.3 cm
WEIGHT: 73 g
OUTER MATERIAL: Medical grade silicone + ABS
INNER MATERIAL: Metall (Motor)
MAX. NOISE: < 40 DB (very quiet)
CHARGING TIME: 60-120 min.
USE DURATION: approx. 60 min.
WATERPROOF: IPX6