How is the toy operated?

1. To switch on the vibrator, press and hold the power button for 2-3 seconds.
2. Use the power button to click through the different vibration modes.
3. To switch off, press and hold the power button for 2-3 seconds.

Attention, the toy must be dry before charging.

If you still need a USB charger, we have one here for you.

The Rabbit vibrator «Jacky» is battery-operated and can be recharged via the included USB cable. All you have to do is plug the included USB cable into one USB port and the other end into the charging socket on the toy. The small socket is located on the underside of the vibrator. Don't worry, the silicone covers the socket slightly, making the toy waterproof. Just carefully poke the plug in and plug it in.

The LED lights up until the toy is fully charged. The charging time is approx. 60-120 minutes. When fully charged and depending on the modes, the Rabbit Vibrator can be used for about 60 minutes.

Clean the toy carefully with a little water and mild soap before and after use. 
For disinfection, we recommend using a toy cleaner.
You can find our Toy-Cleaner here.

Rabbit vibrator «Jacky» should only be used with water-based lubricant, as silicone-based lubricants could damage the material.

The sex toy is IPX6 waterproof. An IPX6 device is protected against dripping, splashing and splash water, but must not be used under water, e.g. in the bathtub.

The toy must not be used while it is charging.

You can find our lubricants here.

TYPE: Rabbit Vibrator (Two Motors)
MOTOR: Battery-powered, rechargeable (USB)
VIBRATION: 10 vibration modes
SIZE: Length 20 cm / Ø 4 cm
WEIGHT: 236 gramm
MATERIAL OUTSIDE Medical grade silicone + ABS
MATERIAL INSIDE: Metal (2x motor, joints)
MAX. NOISE: < 50 DB (leise)
CHARGING TIME: 60-120 min.
DURATION OF USE: ca. 60 min.
WATERPROOF: IPX6
BATTERY: 500 mAh