How is the toy operated?

1. To switch on the vibrator, briefly press the power button.
2. With short clicks on the power button, you can click through the different vibration modes.
3. To switch off, press and hold the power button for 2-3 seconds.

Attention, the toy must be dry before charging.

If you still need a USB charger, we have one here for you.

The classic vibrator «Yumi» is battery-operated and can be recharged with the included USB cable. All you have to do is plug the included USB cable into a USB port and the other end into the charging socket on the toy. The small socket is located at the bottom of the vibrator. Don't worry, the silicone slightly covers the socket, making it waterproof - just carefully poke the plug in and plug it in.

The LED light turns red until the toy is fully charged. The charging time is between 2-3 hours.

When fully charged and depending on the vibration modes, vibrator «Yumi» can be used between 2 and 4 hours.

Clean the toy carefully with a little water and mild soap before and after use. 
For disinfection, we recommend using a toy cleaner.
You can find our Toy-Cleaner here.

Vibrator «Yumi» should only be used with water-based lubricant, as silicone-based lubricants could damage the material.

The sex toy is IPX6 waterproof. An IPX6 device is protected against dripping, splashing and splash water, but must not be used under water, e.g. in the bathtub.

The toy must not be used while it is charging.

You can find our lubricants here.

TYP: Classic vibrator
MOTOR: Battery-powered, rechargeable (USB)
VIBRATION: 10 vibration modes
SIZE: Length 18.2 cm / Ø 3.6 cm
WEIGHT: 126 Gramm
MATERIAL OUTSIDE: Medical grade silicone + ABS
MATERIAL INSIDE: Metall (Motor, joints)
MAX. NOISE: < 40 DB (sehr leise)
CHARGING TIME: 2-3 h
DURATION OF USE: 2-4 h
MOTOR: 2000 bis 6500 RPM/Min.
WATERPROOF: IPX6
POWER: 5V 500 bis 1000 mA