How is the toy controlled?

1. To switch on the vibrator, briefly press the rose button.
2. With short clicks on the rose button, you can click through the different vibration modes of the two motors.
3. To switch off, press and hold the rose button for 2-3 seconds.

Attention, the toy must be dry before charging.

If you still need a USB charger, we have one here for you.

Vibrator «Amy» is battery-operated and can be recharged via the included USB cable. All you have to do is plug the included USB cable into one USB port and the other end into the designated charging socket on the toy. The small socket is located on the bottom –don't worry, the silicone somewhat covers the socket, making it waterproof. Just carefully poke the plug in and plug it in.

The LED lights up during charging. Once the toy is fully charged, the LED goes out. The charging time is between 60-90 minutes. When fully charged and depending on the modes, the vibrator can be used for up to 3 hours.

Clean the toy carefully with a little water and mild soap before and after use. 
For disinfection, we recommend using a toy cleaner.
You can find our Toy-Cleaner here.

What else is there to consider?

Vibrator «Amy» should only be used with water-based lubricant, as silicone-based lubricants could damage the material.

The sex toy is IPX7 waterproof. An IPX7 waterproof toy can be submerged under water and can therefore be used in the shower or bathtub without any problems.
The toy must not be used while it is charging.

You can find our lubricants here.

TYPE: Vibrator
MOTOR: Battery-powered, rechargeable (USB)
VIBRATION: 10 vibration modes
SIZE: Length 17.5 cm (13.5 cm penetration) / Ø 3.1 cm
WEIGHT: 108 g
MATERIAL OUTSIDE: Medical grade silicone + ABS
MATERIAL INSIDE: Metal (motor, joints)
MAX. NOISE: < 50 DB (quiet)
CHARGING TIME: 60-90 min.
DURATION OF USE: up to 3 h
WASSERDICHT: IPX7
BATTERY: Li-Ion 240 mAh 3.7V
CHARGE: 5V 500-1000 mA