How is the toy controlled?

1. To switch on the vibrator, briefly press the power button.
2. With short clicks on the power button, you can click through the different vibration modes.
3. With short clicks on the power button, you can click through the different vibration modes.
4. To switch off, press and hold the power button for 2-3 seconds.

Attention, the toy must be dry before charging.

If you still need a USB charger, we have one here for you.

The classic vibrator «Donna» is battery-operated and can be recharged via the included USB cable. All you have to do is plug the included USB cable into a USB port and the other end into the charging socket on the toy. The small socket is located on the underside of the vibrator. Don't worry, the silicone slightly covers the socket, making it waterproof - just carefully poke the plug in and plug it in.

The LED light will stay on until the toy is fully charged. The charging time is approx. 90 min. When fully charged, vibrator «Donna» can be used for up to approx. 2.5 h, depending on the vibration modes.

Clean the toy carefully with a little water and mild soap before and after use. 
For disinfection, we recommend using a toy cleaner.
You can find our Toy-Cleaner here.

Vibrator «Donna» should only be used with water-based lubricant, as silicone-based lubricants could damage the material.

The sex toy is IPX6 waterproof. An IPX6 device is protected against dripping, splashing and splash water, but must not be used under water, e.g. in the bathtub.

The toy must not be used while it is charging.

You can find our lubricants here.

TYPE: Vibrator
MOTOR: Battery-powered, rechargeable (USB)
VIBRATION: 10 vibration modes on 5 vibration bars each
SIZE: Length 20 cm / Ø 3.6 cm
WEIGHT: 175 g
MATERIAL OUTSIDE: Medical grade silicone + ABS
MATERIAL INSIDE: Metal (motors, joints)
MAX. NOISE: < 50 DB (quiet)
CHARGING TIME: ca. 1.5 h
DURATION OF USE: bis zu 2.5 h
WATERPROOF: IPX7
AKKU: Li-Ion 500 mAh 3.9V
CHARGE: 5V 500-1000 mA