How is the toy controlled?

1. Briefly press the rose button to switch on the Wand Massager.
2. With short clicks on the rose button you can navigate your way through the different vibration modes.
3. To switch off, hold down the rose button for 2-3 seconds.

Attention, the toy must be dry before charging.

If you still need a USB charger, we have one here for you.

The Vibrator «Mikii» is battery operated and can be recharged with the included USB cable. All you have to do is connect the supplied USB cable to a USB port and plug the other end into the charging socket provided on the toy. The small socket is on the underside of the toy. Don't worry, the silicone covers the socket somewhat, which makes it waterproof - Just carefully poke the plug through and plug it in.

The LED light stays on until the toy is fully charged. The charging time is approx. 30-60 minutes.

When fully charged and depending on the vibration level while using, the Wand Massager can be used for approx. 90 minutes.

Carefully clean the water-splash-proof toy with a little water and mild soap before and after use.

We recommend using a toy cleaner for disinfection.
You can find our toy cleaners here.

Wand Massager «Mikii» should only be used with water-based lubricants, as silicone-based lubricants could damage the material.

The sextoy is waterproof IPX6. An IPX6 waterproof toy is protected against dripping, splashing and splashing water, but must not be used under water, e.g. in the bathtub.

The toy must not be used while it is charging.

You can find our lubricants here.

TYP: Wand Massager / Vibrator
MOTOR: Operated with rechargeable batteries (USB)
VIBRATION: 10 vibration modes
SIZE: Length 13.2 cm / Ø 3.2 cm
WEIGHT: 70.5 g
OUTER MATERIAL: Medical grade silicone+ ABS
INNER MATERIAL: Metall (Motor, Joints)
MAX. NOISE: < 50 DB (quiet)
CHARGING TIME: approx. 30-60 min.
USE DURATION: approx. 90 min.
MOTOR: 2000 to 4000 RPM/Min.
WATERPROOF: IPX6
POWER: 5V 500 to 1000 mA